Hitachi PC-ARFP1E Installations- Und Betriebshandbuch Seite 59

MENU OPERATION
1 Select "Sav/Reduction Schedule" from the "Menu" screen
and press "OK".
The power saving/operation noise reduction schedule setting
screen will be displayed as "Sav/Reduction Schedule".
When using a Sub controller or if the indoor unit does not
support power saving, the power saving schedule setting of
the "Intermittent Control" will be displayed.
Refer to (3) below.
OK
/ ?
Menu
OK
/ ?
2 By pressing " " or " ", select the setting item.
The setting will change as follows:
"Capacity Control" ↔ "Intermittent Control" ↔ "Noise
Reduction"
Press "OK".
OK
/ ?
Sav/Reduction Schedule
Set when schedule is used.* Power
OK
Saving mode setting activated too.
/ ?
3 Select the "Day/Time Setting" with "
"OK".
The weekly schedule setting screen will be displayed.
OK
/ ?
Capacity Control
Set when schedule is used. * Power
OK
/ ?
Saving mode setting activated too.
When the current time is not set, the "Time Adjusting" screen
will be displayed automatically.
4 Select the day set with " " or " " and press "OK". The
"Time Setting" screen will be displayed.
The icon " " indicates the power saving control (or the
-
operation noise reduction control), and the icon "
indicates the cancelled time period.
In case of a holiday setting, the icons will appear as
follows " " and " ".
To copy a setting, press "
-
the selected day.
The setting data of the previous day will be copied.
51 PMML0496 rev.1 - 12/2020
15:10(Fri)
Operation Noise Reduction
02
Quick Function
Comfort Setting
05
Sav/reduction Schedule
Function 10
Sel. OK Entr Rtrn
15:10(Fri)
Capacity Control
Intermnt Control
Noise Reduction
Sel. OK Entr Rtrn
" or " " and press
15:10(Fri)
Day/Time Setting
Schedule ON/OFF
OK
Sel. Entr Rtrn
" and "OK" simultaneously for
OK
OK
5 Select the schedule number from 1 to 5 with " " or "
". Then select "ON Time" or "OFF Time" or "Power Saving
level" (or "Operation Noise Reduction level") with "
Set the ON/OFF time or the "Power Saving level" (or
/
"Operation Noise Reduction") with " " or " ".
When pressing continuously " " or " ", the level will
-
increase or decrease in a row.
The setting is possible every day up to five times a day.
-
To set another day, press "Menu" to display the time
-
setting of the next day. Press "OK".
OK
OK
OK
The figure above displays the ON Time at 8:00, the OFF
Time at 12:00 and the power saving level as LOW.
6 The setting confirmation screen will be displayed. Select
"Yes" with " " or "
setting. The screen will return to normal mode.
When another day is set, select "Set other day" and press
"OK".
"
/
?
Capacity Control
0 6 12
Mon
Tue
Wed
Thu
Fri
Sat
/
?
Sun
OK
Sel.
/
?
Capacity Control (Mon)
1 08:00 12:00
2
/
?
3
4
5
OK
Sel. Adj.
/ ?
" and press "OK" to confirm schedule
15:10(Fri)
18
Entr Rtrn
" or " ".
15:10(Fri)
LOW
HIGH
MED
MED
Entr Rtrn