Hitachi PC-ARFP1E Installations- Und Betriebshandbuch Seite 47

CHECK MENU
8 (06) Button Input Test
Press the nine buttons one-by-one. The number indicated
with " A " counts up as buttons are being pressed.
* The order of pressing buttons is random.
Do not press more than one button at a time. It is not be
counted.
Self Checking
0 6 : 0 0 0
9 (07) No Function
This function is not used.
Press "OK" to proceed.
10 (08) Communication (Transmission) Circuit Test
The wired controller automatically starts to check the
communication circuit.
07: No Function
08: Transmission Test
Self Checking
11 (09) Wired Controller Thermistor Test
The detected temperature by the wired controller thermistor
is displayed at " A " in the figure at the right.
Self Checking
0 9 : 0 2 5
39 PMML0496 rev.1 - 12/2020
A
0 7 : 0 0 0
A
12 (10) Date/Time Test
The date and time is changed from "2012.03.04 12:34" to
"2008.01.01 00:00".
Self Checking
1 0 : 0 0 0
13 (11) EEPROM Test
EEPROM Clearing Cancel
-
/ " (return / help). ?
Press "
EEPROM Clear
-
Press "OK" or wait 15 seconds. EEPROM data is
cleared. During the process, the numbers is indicated the
location with " A ".
If has a value of "999", EEPROM is in a faulty
A
-
condition.
If A has "999", the process does not proceed to the next
step.
Self Checking
1 1 : 0 0 0
14 (13) Clear EEPROM
The wired controller automatically starts the EEPROM
clearing process.
Self Checking
1 3 : 0 0 0
15 After several seconds pass, the self checking is completed
and the wired controller is automatically restarted.
2008.01.01 00:00
A