Mounting - MA lighting 2Port Node Bedienungsanleitung

Technischer Service: tech.support@malighting.com; +49.5251.688865-30 Emergency Line: +49.5251.688865-99
MA Lighting Technology GmbH . Dachdeckerstr. 16 . D-97297 Waldbüttelbrunn

Mounting

For the flush mounting, you can use standard flush boxes (not supplied).
For US standard flush box Double Gang 4" x 4" x 2" (2Port Node flush-mount US
version)
Use 4 screws to mount the front cover / PCB combination to the flush box.
Fur UP distribution box 80x80x50 (2Port Node flush-mount EU version)
Recommendation: UP-box by KAISER
Use 4 screws to mount the front cover / PCB combination to the flush box.
Before the initial startup of the 2Port Node, please read the general safety instructions
(see chapter 9) and observe the material VDE or EN regulations !
After connecting the network cable, the 2Port Node is ready for service and can be
configured.
59 59 59 59
59