MA lighting 2Port Node Bedienungsanleitung Seite 51

Technischer Service: tech.support@malighting.com; +49.5251.688865-30 Emergency Line: +49.5251.688865-99
MA Lighting Technology GmbH . Dachdeckerstr. 16 . D-97297 Waldbüttelbrunn
Streaming ACN (sACN)
Note: First open SETUP / NETWORK MASTER / NETWORK PROTOCOLLS / sACN
and select "Final" in the Protocoll column. "sACN Draft" does not work with MA
2Port Node!
Open SETUP / NETWORK MASTER / MA NETWORK CONFIGURATION and
press 2 Port
Select sACN in the Mode column
Press the button under XLR A and XLR B Port
select OFF, IN or OUT
At DMX IN set Universe and Priority
At DMX OUT set Universe and Merge Mode
NONE = no merge
LTP = Latest Take Precedence
HTP = Highest Take Precedence
LoTP = Lowest Take Precedence
Session ID:
Here, you can set the Session ID to start the session between the 2Port Node and
the console or the onPC. For all devices involved in the session, you must set the
same Session ID.
If ARTNET is activated this cell is inactive
...together with grandMA2
51 51 51 51 51