Layout - MA lighting 2Port Node Bedienungsanleitung

Layout

SURFACE-MOUNTING
With power supply over the network
(PowerOverEthernet) and additionally with the integrated
110/220V 50-60Hz power supply unitWith power supply
over the network (PowerOverEthernet) and additionally
with the integrated 110/220V 50-60Hz power supply unit
The 2Port can be operated by means of PowerOverEthernet
or by an external power supply or from both sources
simultaneously – no need to set or activate itThe 2Port can be
operated by means of PowerOverEthernet or by an external
power supply or from both sources simultaneously- no need
to set or activate it.
Technischer Service: tech.support@malighting.com; +49.5251.688865-30 Emergency Line: +49.5251.688865-99
MA Lighting Technology GmbH . Dachdeckerstr. 16 . D-97297 Waldbüttelbrunn
- ETHERNET 10/100 - base T/X
For RJ45 plug connection
- Power supply with fuse T1A, L250V
- LED Power
Will be on while external power supply or
PowerOverEthernet
- Display
- DATA A DMX OUT or IN
- LED (green) DATA
Will be on while transferring data via the A port
- DATA B DMX OUT or IN
- LED (green) DATA
Will be on while transferring data via the B port
- Button (red) MENU
To step through the menus
- 2 M12 threads (PartNo. 130191 / 130193 / 130192
/ 130171 / 130172 / 130173 )
or 1/2" 13-UNC threads (PartNo. 130196 / 130197 / 130198 / 130176
/ 130177 / 130178 )
on the back side and on the top cover for fastening on the rigg.
41 41 41 41
41