MA lighting 2Port Node Bedienungsanleitung Seite 53

Technischer Service: tech.support@malighting.com; +49.5251.688865-30 Emergency Line: +49.5251.688865-99
MA Lighting Technology GmbH . Dachdeckerstr. 16 . D-97297 Waldbüttelbrunn
...together with grandMA2
DMX OUT
For DMX-Output. Here, you can combine different Merge modes to other
Universes.
Merge Mode:
In this box, you can define how values should behave when triggering the
same channel in one Universe simultaneously.
The Merge modes (HTP / LTP / LoTP) can only be used in stand-alone
operation.
Stand-alone means that both Universes entering the 2Ports (both ports
must be set to DMX-IN) and being merged in the next port, must not be
controlled by a console. That is, the consoles may only output by means
of DMX data. And so, the consoles must only output the universe via DMX
- at grandMA consoles the used universe numbers must not marked green
in the DMX-Output menu. See picture left: use universe number 3 oder
higher as standalone universe number.
In one session, a Universe may only be set twice (max.) as DMX IN
(as when merging, only 2 signals will be compared)- and the DMX-
OUT must be set to HTP , LTP or LoTP! The setting "NONE" creates
faulty signals.
53 53 53 53
53