MA lighting 2Port Node Bedienungsanleitung Seite 52

Technischer Service: tech.support@malighting.com; +49.5251.688865-30 Emergency Line: +49.5251.688865-99
MA Lighting Technology GmbH . Dachdeckerstr. 16 . D-97297 Waldbüttelbrunn
Settings for Port 1 and / or Port 2
For both ports, you can define different
NOTE: You can configure the ports as IN or OUT independently form the port features
(DMX-in plug or DMX-out sockets). The appropriate adapters and cables are available
from MA LIGHTING.
Mode:
OFF
When selecting OFF as setting, no DMX signal will be output. With this setting, the
Merge mode will not be available.
DMX IN
For DMX-Input. Can be connected with any DMX-512-producing console.
Use DMX IN:
- for output at another 2Port (DMX OUT)
or
- as remote of another console
or
- for mixing (merge) of 2 universe
In one session, a Universe may only be set twice (max.) as DMX IN (as when
merging, only 2 signals will be compared)- and the DMX-OUT must be set to
HTP , LTP or LoTP! The setting "NONE" creates faulty signals.
...together with grandMA2
settings.-
52 52 52 52 52