Endress+Hauser Easytemp TMR31 Bedienungsanleitung Seite 14

Installation
"
14
1. Seal the process connection (TMR31) with Teflon tape before you screw
in the device.
2. Ensure that the hygienic process connections (TMR35) and the
connection adapters can withstand the maximum process pressure.
3. Install the device before the process application is started.
4. Fit the M12 plug onto the device and connect the power supply
accordingly (s. Kap. 3).
Caution!
Do not tighten the M12 plug too much, in order to prevent damage to the
device.