Displaying Device Information; Reset Daily Piece Counter - Weidmuller CRIMPFIX ECO Originalbetriebsanleitung

Operating software
5.8 Displaying device information
As an operator, you can display the device information.
► Open the Info menu.
Figure 5.8 Info menu
Parameter Meaning
Software version Operating software version
Piece counter
total Number of cycles completed since the
machine was switched on
Service Number of cycles until the next service is
due
Day Number of cycles completed since the
machine was last switched on
The total counter counts the working cycles during the en-
tire service life of the machine.
The machine's service interval is 250,000 working cycles.
The service counter counts down, starting at 250,000.
Once 250,000 working cycles have been completed, the
service counter is at 0, and a service message is displayed
the next time the machine is started, see chapter 8.2.
The service counter counts back up, and the negative sign
indicates that a counting cycle has been completed.
40

5.9 Reset daily piece counter

► Open the Info menu.
Figure 5.9 Info menu
► To reset the daily piece counter, tap Reset.
The daily piece counter will be reset to zero.
Further device information can be displayed following con-
sultation with Weidmüller service.
2859970000/00/02.2022