Beko HCA92640BH Benutzerhandbuch Seite 16

5 Installation of appliance
Attach the flue flaps to the plastic flue adapter in
the package content as follows.
Insert the plastic pin (Figure 13/area no. 2) on the
pin socket on the motor exhaust (Figure 13/area
no.1). Then bend the flap lightly to insert the other
pin on the flap and insert the other pin to its socket
(Figure 13).
(Figure 14)
1. Air Baffle
2. Plastic Chimney
Attach the plastic Chimney adapter, which is in-
cluded in the package, in the direction of the air
baffle. Lock the Chimney adapter by turning it in
the direction of the arrow (Figure 14).
(Figure 15)
Assemble the air baffle group with 3.9 x 22
screws from point C, D, E, F that you have already
prepared (Figure 15).
16 / EN
1
2
(Figure 16)
1. Aluminium Air Outlet Pipe
Make the air outlet pipe assembly (Figure 16).
C
Install the Chimney plates of the hood (Figure 16)
Since twists and bends in the alumin-
ium pipe will lead to reduction in the
air suction power, avoid using twists
and bends as much as possible.
Cooker Hood / User Manual