Cleaning; Reassembling - STORZ & BICKEL Mighty Gebrauchsanweisung

7.1.3 Cleaning

CAUTION
Isopropyl alcohol is flammable
and may easily ignite.
Caution! Hot surface!
• Follow the safety instructions
of the isopropyl alcohol
manufacturer!
The Cleaning Brush, cotton swabs
i
and paper or cotton cloths are
suitable for manual cleaning. We
recommend warm rinsing water or
isopropyl alcohol as solvents.
X Place all parts of the Cooling Unit
(except the Cap Lock) and the Fill-
ing Chamber Screen in isopropyl
alcohol for a maximum of 1/2 hour.
Prolonged contact with isopropyl
i
alcohol can lead to color chang-
es or embrittlement of the plastic
parts.
7 C L E A N I N G
X Allow all parts to dry thoroughly.
X Check all parts for damaged sur-
faces, cracking, softening, harden-
ing, soiling or discoloration.
X Remove any damaged parts.
X If necessary, clean the cap lock
with warm rinse water or wipe it
with isopropyl alcohol.
NOTICE
Material damage caused by
improper cleaning
Stickers with the signet hologram
may fade and their adhesive may
dissolve
• Avoid prolonged contact with
isopropyl alcohol
Do not put the Herb Mill, Filling Aid
i
and Magazine in isopropyl alcohol.
Clean these parts in the dishwasher,
or with warm rinsing water.

7.1.4 Reassembling

X Assemble the parts in reverse or-
der.
When assembling, make sure that
i
Seal Rings are properly seated. The
small Base Seal Ring, especially,
must sit completely in the Cooling
Unit Cap and be no longer visible.
X Carefully insert the upper Screen
into the groove provided.
57