Safety Lock - Lionelo Liam Bedienungsanleitung

5.2 Shoulder straps connection
5.2.1 Hook the shoulder straps in the harness connector as shown in
the fig. 6a.
5.2.2 Run the harness strap through the harness connector (fig. 6b)
5.3 Adjustment strap connection
5.3.1 Attach the strap to the hook (fig. 7).
5.3.2 T h re a d t h e h o o k t h ro u g h t h e h o l e a t t h e f ro n t
of the seat (fig. 8a). Then pull the shoulder straps up so as to lock the
harness at the underside of the seat.
5.3.3 To remove the adjustment strap follow the above steps (up to
point 5.3.2) in reverse order (fig. 8b).

5.4 Safety lock

5.4.1 In order to fasten the buckles in the safety lock, first joint them
(fig. 9a) and insert the combined buckle into the safety lock (from the
top) (fig. 9a). The "click" sound indicates that the safety lock has been
properly fastened.
5.4.2 To remove the buckles from the safety lock, press the red button on it
(fig. 9b).
A - push
5.5 Shoulder strap height adjustment
5.5.1 Loosen the shoulder straps.
5.5.2 Remove the shoulder straps from the harness connector.
5.5.3 Remove the shoulder straps from the slots.
5.5.4 Choose the most appropriate slots and run the shoulder straps
through them. The slots position should be determined by the height of
the child.
5.5.5 Hook the shoulder straps in the harness connector.
5.5.6 Tighten the straps.
5.6 Proper height of the shoulder straps
5.6.1 The shoulder straps should be neither too tight nor too loose (fig. 10).
EN ‑ 10 ‑