Introduction; Function; Target Group; Notes On Using These Instructions - Sartorius BioPAT Xgas Betriebsanleitung

1

Introduction

1.1

Function

These operating instructions describe the safe installation and use of the
BioPAT Xgas. The operating personnel must read these instructions prior to
®
operational startup. These instructions should always be available at the
workplace.
1.2

Target Group

These operating instructions are designed for qualified personnel. Only
qualified personnel may set up BioPAT
perform in-process operation or maintenance.
1.3

Notes on Using these Instructions

All information in these operating instructions considers the state of the art,
the applicable standards and guidelines, and our many years of experience
and knowledge.
These operating instructions provide you with all the information necessary to
install and operate the BioPAT
The operating instructions must be read and used by all persons entrusted
with the operation, service, cleaning, and troubleshooting of the device.
This applies particularly to the safety instructions listed.
Please read these operating instructions carefully and completely before
t
using this device.
These instructions are part of the product. Keep them in a safe and easily
t
accessible place near the device's site of installation.
If the instructions should be lost or misplaced, please contact Sartorius
t
Stedim Biotech for a replacement or download the latest version from our
website: www.sartorius.com
Xgas, connect it to the bioreactor or
®
Xgas (referred to as "device" in the following).
®
Operating Instructions BioPAT
Introduction
Xgas
®
5