Operating Information; Safety Instructions - Sartorius BioPAT Xgas Betriebsanleitung

5
5.1
Hazards for users from the composition of the
exhaust air!
− CO
CAUTION
the room air;
− O
high O
tion of oxy-hydrogen gas with H
When channeling into room air, ensure that
t
your work area is well ventilated. If constitu-
ents, e.g. generated by reactions with other
substances, may be hazardous, channel the
exhaust air into ventilation fittings on the lab-
oratory side. Temperatures in the exhaust air
>40°C or oxygen-free exhaust air can damage
the sensors in the BioPAT
nitrogen used during zero-point calibration of
the DO sensor in the culture vessel must not
escape into the BioPAT
temperatures >40°C and during zero point
calibration of the DO sensor with nitrogen,
leave the BioPAT
the exhaust line and | or block the inlet lines or
disconnect them temporarily.

Operating Information

Operating
Information

Safety Instructions

: Danger of suffocation from release into
2
: Combustion of flammable materials at
2
concentrations or potential produc-
2
Xgas disconnected from
®
Operating Instructions BioPAT
.
2
Xgas. The pure
®
Xgas. At process
®
Xgas
®
25