Sartorius BioPAT Xgas Betriebsanleitung Seite 19

Fig. 5: Cable set included
Connecting the Cables to the Biostat
B-DCU II
Use only the cables that are especially
t
designed for this purpose. Observe the
specifications below and the "Technical
Documentation on the Bioreactor".
Wait until the BioPAT
t
room temperature.
Connecting the Y cable
Take the Y cable of the BioPAT
t
Connect the female connector with the three
t
cable outputs to the left plug of the BioPAT
Xgas.
Connect the BioPAT
t
supply.
Operating Instructions BioPAT
Installation
B and
®
Xgas has reached
®
Xgas.
®
Xgas to the power
®
Xgas
®
®
19