Sartorius BioPAT Xgas Betriebsanleitung Seite 23

Connecting to Biostat
Connect the analog signal outputs of the
t
BioPAT Xgas to the control tower of the
®
Biostat C Plus as follows:
®
Take the analog serial connection cable.
t
Connect the cable plug labeled "Xgas" to
t
the right-hand socket of the BioPAT
Connect the cable plug labeled "Ext.
t
Sig.-A" to the "Ext. Sig.1-2" socket of the
Biostat C Plus.
®
Operating Instructions BioPAT
Installation
C Plus
®
Xgas
®
Xgas.
®
23