Appendix; Calibration Table - Sartorius BioPAT Xgas Betriebsanleitung

Appendix

7 Appendix
7.1

Calibration Table

Only have the complete calibration conducted by Sartorius Stedim Biotech
Service.
Conduct the monthly 1-point calibration as described in Section
→ "6.1.1 Calibration", page 33.
Also calibrate this way every time after separating sensor head and measuring
adapter. Log the calibrations performed, e.g. in the table below.
Date Procedure
Complete calibration
1-Point calibration
36 Operating Instructions BioPAT
Conditions Name
25 °C, 1 bar BioPAT
Xgas
®
Signature
Xgas
®