Using The Hot-Swap Battery Function - Werock Rocktab U200 Betriebsanleitung

3.
At Screen Resolution, click the drop-down menu and select the desired resolution by tapping the
scale
4.
Press Apply. A Display Settings prompt appears asking the user if you want to keep the applied resolution.
5.
If the new resolution is the desired display setting, click Keep and proceed to the next step. If it is not, click
Reset and select a different resolution to switch to and start again at step 2.
6.
You can now use the device with the new resolution setting.

Using the hot-swap battery function

The Rocktab U212 and U214 rugged tablets support hot-swap, which means the tablet does not need to be
turned off to replace the main battery.
To support hot-swap, there is a backup battery inside the tablet that is charged together with the main
battery. This battery cannot be removed and requires sufficient power to hot swap the main battery.
When the backup battery is fully charged, the tablet can provide up to 5 minutes of runtime for hot swapping
the main battery.
Attention
Rocktab U200 User Manual
136 / 151