Intended Use; Warranty - Werock Rocktab U200 Betriebsanleitung

Intended use

Please use this device only as intended. Our devices are designed to be maintenance-free or low-
maintenance, so that normally no intervention by the end user is required. Please also note the operating
and storage temperatures stated in the technical data.
Please use this device only as intended. Our devices are designed to be maintenance-free or low-
maintenance so that, as a rule, no intervention by the end user is required. Please also observe the
operating and storage temperatures specified in the technical data.
The device is a hand-held electrical equipment and for mobile acquisition, processing and/or radio
transmission of data. The permissible operating data of the device used must be observed.
The device is not intended for use in private households.
Any other use is considered improper and can lead to personal injury and damage to property.

Warranty

Warranty period: 12 months
WEROCK warrants to the Buyer that all products are free from defects in material and workmanship for the
above period from the date of invoice.
Warranty claim
Warranty rights exist. A warranty claim can only arise with regard to the properties of the goods; reasonable
deviations in the aesthetic properties of the goods are not subject to the warranty claim. In the event of a
defect, WEROCK shall, at its option, provide subsequent performance in the form of rectification of the
defect or new delivery. The risk of accidental loss or deterioration of the goods shall pass upon delivery to
Rocktab U200 User Manual
Damage to the touch screen by sharp objects
The product's touch screen can be damaged by the use of sharp
objects (e.g. screwdrivers, knives, scissors or other tools). The
touch screen of the product is only suitable for operation with
fingers or special operating aids.
CAUTION
Risk of injury from glass and metal splinters
Bending or twisting could break the glass of the display, circuit
board or mechanics. If the glass is broken, do not attempt to
touch or remove any glass parts of the product.

Avoid operating the product with unsuitable styli.

Do not bend the product.

Do not use the product again until it has been replaced
by qualified service personnel.
89 / 151