Werock Rocktab U200 Betriebsanleitung Seite 129

1.
When the RFID tag is detected by the RFID antenna, the data is read automatically.
2.
The user can define the RFID scan frequency from the drop-down menu as shown below. The
frequency can range from 1 second to 9 seconds.
Single Scan
The user can also define the RFID reader scanning as a single scan. With this setting, the RFID reader will
only be triggered when the user clicks "Send".
RFID settings
Sound
The Sound checkbox defines whether a beep sounds when scanning the data.
Output to
This setting defines the output type of the scanned data. Two options are available:

Keyboard Wedge
With this setting, the scanned data is sent like keyboard data. The scanned data can be output
directly to the demo area below this window, or the user can open other utilities, such as Office
Word or Notepad files, for data input..
Rocktab U200 User Manual
129 / 151