Using The Camera (Rocktab U212) - Werock Rocktab U200 Betriebsanleitung

through the setup in this section.

Using the camera (Rocktab U212)

The HotTab menu option allows users to take a picture or record a video. Before use, make sure the camera
is turned ON/OFF in the Device Menu with the following scenarios.
To open the camera:
1.
Launch the HotTab utility
2.
Tap the " Device ON/OFF " button to check the status of the built-in devices.
3.
Check the status color of the camera icon
4.
Orange: Camera is enabled
5.
White: camera is disabled
6.
If the camera is disabled (white), tap the camera icon to enable it (orange).
7.
Click the back arrow at the top to return to the HotTab main menu.
8.
Tap the camera icon to open the camera menu.
Nr. Object
1 Review
2 Settings
3 Switch camera
4 Flash control
Rocktab U200 User Manual
.
Symbol Description
Review
Opens the camera settings page.
Available settings:
- Save image: change/check storage location for images.
- Save Video Folder: change/check storage location for video
recordings.
- Image Quality: compress image quality.
Switch between front and rear camera
Enables/disables the LED flash when taking pictures..
113 / 151
: