Hotkey Buttons For Specific Functions - Werock Rocktab U200 Betriebsanleitung

5 LED Indicators
Indicate the current status of the tablet
computer: Power, Battery, HDD, RF
6 - not applicable in standard version -
7 Programmable function keys
F1, F2, F3
8 Volume control buttons
9 HotTab Quick Access key
10 USB 3.0 type A port
11 USB 3.0 type A port
12 USB 3.0 Type C port
The high-speed USB port allows you to
connect USB devices, such as USB flash
drive, mouse, keyboard, printer, etc.
Note: The USB Type-C port follows the
USB 3.0 standard, which does not support
Alternate Mode (ALT) or USB Power
Delivery (USB-PD).
13 SD card reader

HotKey buttons for specific functions

Physical keys can also be used to emulate frequently used keystrokes in addition to dedicated functions. In
another scenario, a single physical key or a combination of physical keys provide different keyboard
strokes, which are specified below.
Physical keys can also be used to emulate frequently used keystrokes in addition to dedicated functions. In
another scenario a single physical key or a combination of physical keys provide various functions that are
specified below:
While booting
Key
F1
F2
Up (+)
Down (-)
Rocktab U200 User Manual
18
19
20
21
22
23
24
25
26
Function
F6 to open Recovery menu
Esc to open the BIOS setup screen
Louder (Rocktab U214 only)
Quieter (Rocktab U214 only)
98 / 151
connections behind it)
Kensington Lock connector
Stylus
180° rotatable stand/carrying handle (side
view)
Battery
Removable 15.4 V typ. 5900 mAh Li-
polymer battery (4S1P)
Service window
Access to 2 SSD M.2 slots, 1 WWAN
mPCIe slot and micro SIM slot.
180° rotatable stand/carrying handle (rear
view)
Battery lock
Latch for locking the battery after inserting
the battery. Not spring loaded.
Battery lock
Spring-loaded slider for locking the battery.
Pogo pin connector for docking station