Reading The Display - struers AbraPlan-10 Gebrauchsanweisung

Reading the Display

14
AbraPlan-10
Instruction Manual
The display is primarily divided into 4 areas. The position of these
areas and the information they contain are explained in the
illustration below, which uses the CONFIGURATION Menu as an
example:
A
B
C
D
Heading: this tells you where you are in the software.
A
Information fields: these will either be numerical values or
B
text fields providing information associated with the process
shown in the heading. The inverted text shows the cursor
position.
Help text: helpful hints to allow you to continue.
C
Function key options: the functions of these change with the
D
window displayed.
During the grinding process the screen could look as follows:
C
D
Grinding time remaining
A
Force applied on specimen holder
B
Load on main motor
C
Function(s) selectable during process
D
A
B