Sleep Mode; Changing/Editing Values; Numeric Values - struers AbraPlan-10 Gebrauchsanweisung

Sleep Mode

Changing/Editing Values

Numeric Values

AbraPlan-10
Instruction Manual
To increase the lifetime of the display, the backlight is
automatically switched off if AbraPlan-10 is not used for 15 min.
Press any key to re-activate the backlight.
The sample screens in this Instruction Manual show a number of
possible texts. The actual screen displayed may differ from the
Depending on the type of value, there are two different ways of
editing.
Turn knob to select the value to be changed, e.g. Process
time:
D
D
Push knob to edit value.
Two square brackets [ ] appear around
D
the value.
D
Please Note
samples in this manual.
15