struers AbraPlan-10 Gebrauchsanweisung Seite 14

Flushing Unit Head
8
AbraPlan-10
Instruction Manual
When attached to its mounting (as illustrated), the flushing unit
supplies water/coolant to the grinding stone/ diamond grinding
disc during the grinding and dressing processes. However, the
flushing unit can be removed from the mounting and used to hose
down the grinding area and samples etc. To do this:
Squeeze in and hold the clamp buttons (illustrated by arrows)
to cut-off the water/coolant flow.
Press F1 to start the pump.
Lift the flushing unit free of its mounting.
Direct the flushing unit in the desired direction and release
the clamp buttons.
Press F1 to stop the pump.
Reinsert the flushing unit in its mounting.
If the grinding/dressing process is not active, a water/coolant flow
can be achieved by pressing F1 when the GRINDING or
DRESSING Menus are displayed.