Herunterladen Inhalt Inhalt Diese Seite drucken

Product Care Requirements - DJI MATRICE 30 Serie Haftungsausschluss Und Sicherheitsvorschriften

Vorschau ausblenden Andere Handbücher für MATRICE 30 Serie:
Inhaltsverzeichnis

Werbung

50°
50°
65°
65°
65°
65°
DJI AirSense
1. M30 series aircraft with this system have built-in ADS-B receivers that are
able to detect signals broadcast by manned aircraft installed with ADS-B
transmitters. If an alert is received from DJI Pilot2 while operating an aircraft,
perform emergency evasion according to the height of the manned aircraft to
ensure safety.
2. This system cannot take over or control the aircraft on behalf of the user to
avoid any manned aircraft. The user is responsible for keeping the aircraft
operating in a safe environment and ensuring flight safety. The user is
prohibited from using this system to engage in any activity that compromises
flight safety or violates relevant laws and regulations.

Product Care Requirements

Storage and Transportation
Observe the following rules to avoid collision, serious injury, and property
damage:
50°
65°
65°
65°
65°
65°
1. Small parts, such as cables and straps, are dangerous if swallowed. Keep
all parts out of reach of children and animals.
1. Fully charge and discharge the battery regularly to maintain battery health.
Refer to the Intelligent Flight Battery Safety Guidelines for more information
about the safe use of the battery.
2. DO NOT allow the camera to come into contact with or become immersed
in water or other liquids. Wipe the camera dry with a soft, absorbent cloth
if it gets wet. Powering on an aircraft that has fallen into water may cause
permanent component damage. DO NOT use substances containing alcohol,
benzene, thinners, or other flammable substances to clean or maintain the
camera. DO NOT store the product in humid or dusty areas.
3. Power off and rotate the gimbal pitch axis to +90° to lock the gimbal after
each operation to protect the gimbal. Store the aircraft in the carrying case
when storing or transporting for an extended period. Otherwise, the gimbal
damper and the camera may be damaged.
4. The frame arms and propellers must be folded to the original position
during transportation. Place the aircraft gently in the carrying case. It is
recommended to use the carrying case whenever transporting the aircraft in
order to avoid damaging the IMU and other parts.
Maintenance
1. It is recommended to perform regular maintenance for aircraft. Contact DJI
Support or a DJI authorized dealer for product inspection or repair after any
crash or collision. Operating a damaged aircraft is dangerous and may cause
bodily injury or property damage.
2. Fully charge and discharge the battery regularly to maintain battery health.
Refer to the Intelligent Flight Battery Safety Guidelines for more information
about the safe use of the battery.
3. Regularly check the battery level and battery cycle counts. The battery is
rated for 400 cycles.* It is not recommended to continue to use afterward.
Refer to the Intelligent Flight Battery Safety Guidelines for more information
about the maintenance of the battery.
4. Refer to the maintenance manual for information on how to check and
maintain the product after using for an extended period in order to keep the
product in the best condition possible and reduce potential safety hazards.
The frequency of how often maintenance should be performed depends on
how often the product is used, but maintenance must be performed at least
once every six months. The product can also be sent to DJI for maintenance.
Visit https://enterprise.dji.com/enterprise-maintenance for more information.
5. Parts of the aircraft have a safe life. From the time of first use, wearing parts
such as the propeller and gimbal damper have a safe life of 300 hours while
the other components of the propulsion system (e.g. motors) have a safe life
of 900 hours. There may be potential safety hazards if the product is used
after the safe life has passed. DJI is not responsible for any risks that may
arise from continuing to use the product.
* The lithium battery's life will be affected if stored at a high battery level. The
TB30 battery can be charged up to 400 cycles, as long as it is stored with a
charge of 90% or above for no more than 120 days of the first year. It is strongly
recommended to follow the usage guidelines on the sticker inside the BS30
battery station.
9

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Matrice m30Matrice m30 t

Inhaltsverzeichnis