Intended Use - Hilti Nuron AG 6D-22-125 Original Bedienungsanleitung

3 Description
3.1 Product overview
3.2

Intended use

The product described is a hand-held cordless angle grinder. It is designed for cutting and grinding metal
and mineral materials, brushing, sanding and for hole cutting in tiles, all without use of water.
▶ The tool can be used for cutting, slitting and grinding mineral materials only in combination with the
appropriate guard.
▶ A dust removal hood together with a suitable Hilti vacuum cleaner must be used for working on mineral
materials such as concrete or stone.
• For this product, use only Hilti Nuron lithium-ion batteries of the B 22 series. For optimum performance,
Hilti recommends the batteries stated in the table at the end of these operating instructions for this
product.
• For these batteries, use only Hilti chargers of the type series stated in the table at the end of these
operating instructions.
3.3 Items supplied
Angle grinder, side handle, standard guard, front cover, clamping flange, clamping nut, wrench, operating
instructions.
Other system products approved for use with this product can be found at your local Hilti Store or at:
www.hilti.group
3.4 3D Active Torque Control (
The product has 3D Active Torque Control (
If it detects a sudden, unforeseen movement in operation, the product automatically shuts down immediately.
*2233921*
1
ATC )
3D
ATC).
3D
2233921
Guard release button
@
Spindle lock button
;
Lockable on/off switch
=
Battery status indicator
%
Battery release button
&
Battery
(
Spark guard
)
Air vents
+
Main grip with Sens­Tech function
§
Side handle
/
Threaded bushing for the side handle
:
Standard guard with front cover
∙
Clamping flange with O-ring
$
Abrasive cut-off wheel / abrasive grinding
£
wheel
Clamping nut
|
Kwik lock quick-release lock nut (optional)
¡
Pin wrench
Q
English 29