Intended Use - Hilti AG 4S-A22 Bedienungsanleitung

▶ Do not expose batteries to high temperatures, direct sunlight or fire.
▶ Do not disassemble, crush or incinerate batteries and do not subject them to temperatures over 80 °C.
▶ Do not use or charge batteries that have suffered mechanical impact, have been dropped from a height
or show signs of damage. In this case, always contact your Hilti Service.
▶ If the battery is too hot to touch it may be defective. In this case, place the product in a non-flammable
location, well away from flammable materials, where it can be kept under observation and allowed to
cool down. In this case, always contact your Hilti Service.
3 Description
3.1 Overview of the product
3.2

Intended use

The product described is a hand-held cordless angle grinder. It is designed for cutting and grinding metal
and mineral materials, brushing, sanding and for hole cutting in tiles, all without use of water. It can be used
only for dry grinding / cutting.
• The power tool may be used for cutting, slitting and grinding mineral materials only when equipped with
the corresponding guard (optional accessory).
• A dust removal hood together with a suitable Hilti vacuum cleaner must be used for working on mineral
materials such as concrete or stone.
▶ Use only Hilti Li­ion batteries of the B 22 series with this product.
▶ Use only Hilti battery chargers of the C4/36 series for charging these batteries.
3.3 Items supplied
Angle grinder, side handle, standard guard, front cover, clamping flange, clamping nut, pin wrench, dust
filter, operating instructions.
Other system products approved for use with this product can be found at your local Hilti Store or online at:
www.hilti.group.
24 English
Printed: 29.08.2019 | Doc-Nr: PUB / 5476774 / 000 / 02
1
@
;
=
%
&
(
)
+
§
/
:
∙
$
£
|
¡
Battery
Battery release button
Charge state indicator
Speed regulation
On/off switch
Spindle lock button
Side handle
Guard release button
Spindle
Standard guard
Clamping flange with O-ring
Abrasive cutting disc / abrasive grinding disc
Clamping nut
Kwik lock clamping nut (optional)
Pin wrench
Dust filter
2223267
*2223267*