Product Overview; Intended Use - Hilti AG 5D-22-125 Original Bedienungsanleitung

3 Description
3.1

Product overview

3.2

Intended use

The product described is a hand-held cordless angle grinder. It is designed for cutting and grinding metal
and mineral materials, brushing, sanding and for hole cutting in tiles, all without use of water.
The tool can be used for cutting, slitting and grinding mineral materials only in combination with the
appropriate guard.
A dust removal hood together with a suitable Hilti vacuum cleaner must be used for working on mineral
materials such as concrete or stone.
• For this product, use only Hilti Nuron lithium-ion batteries of the B 22 series. For optimum performance,
Hilti recommends the batteries stated in the table at the end of these operating instructions for this
product.
• For these batteries, use only Hilti chargers of the type series stated in the table at the end of these
operating instructions.
3.3 Items supplied
Angle grinder, side handle, standard guard, front cover, clamping flange, clamping nut, pin wrench, operating
instructions.
Other system products approved for use with this product can be found at your local Hilti Store or at:
www.hilti.group
3.4 Motor protection function
The motor protection function monitors current consumption and motor temperature and prevents the
product from overheating.
If the motor is overloaded through application of excessive working pressure, the product's performance
drops noticeably or it might stall completely.
If the power tool stalls or slows significantly due to overloading, release the pressure applied to the
product and then allow it to run under no load for approx. 30 seconds.
28 English
1
Guard release button
@
Spindle lock button
;
Battery status indicator
=
Battery release button
%
Battery
&
Spark guard
(
Air vents
)
Vibration-absorbing side handle
+
Grip surface
§
Switch-on interlock
/
On/off switch
:
Threaded bushing for the side handle
∙
Spindle
$
Standard guard with front cover
£
Clamping flange with O-ring
|
Abrasive cut-off wheel / abrasive grinding
¡
wheel
Kwik lock clamping nut (optional)
Q
Clamping nut
W
Pin wrench
E
2272031
*2272031*