Saving Energy; Using The Cooling Device - Dometic Coca-Cola Cool Can10 AC/DC Bedienungsanleitung

Operation
6.1

Saving energy

• Choose a well ventilated location which is protected from direct sunlight.
• If you want to set an increased energy efficiency and a limited cooling capacity for the cooling device,
use the device's ECO mode.
• Allow warm food to cool down first before placing it in the cooling device to keep cool.
• Do not open the cooling device more often than necessary.
• Do not leave the cooling device open for longer than necessary.
• If the cooler has a basket: For optimal energy consumption, position the basket according to its posi-
tion on delivery.
• On a regular basis, make sure the lid seal still fits properly.
6.2

Using the cooling device

A
NOTICE! Risk of damage!
• Ensure that the items placed in the cooling device are suitable for cool-
ing to the selected temperature.
• Ensure that food or liquids in glass containers are not excessively
refrigerated. Liquids expand when they freeze. This can therefore
destroy glass containers.
• Ensure that your refrigerated container is well ventilated so that any
heat created can dissipate. Otherwise proper functioning cannot be
ensured. It is especially important not to cover the air vents.
Setting up the cooling device
➤ Place the cooling device on a firm base.
Ensure that the ventilation slots are at least 10 cm away from the wall so that the heat that arises
during operation can be drawn off.
Connecting the cooling device to DC power
➤ Plug the DC connection cable (fig. 1 2, page 3) into the DC socket of the cooling device (fig. 2 2,
page 3).
➤ Connect the connection cable to a DC socket.
Connecting the cooling device to AC power
➤ Plug the AC connection cable (fig. 1 3, page 3) into the AC socket of the cooling device (fig. 2 1,
page 3).
➤ Connect the connection cable to an AC socket.
Setting the operating mode
➤ Push the switch (fig. 2 3, page 3) on the control panel to "HOT" or "COLD" to switch the device on.
✔ The cooling device starts cooling/heating the interior and the appropriate LED lights up.
Taking the cooling device out of operation
➤ Slide the switch (fig. 2 3, page 3) to the "OFF" position.
➤ Disconnect the device from the voltage supply.
10
Cool Can 10 AC/DC
EN