Control Elements/Operation; Control Elements - Storch HighDry 300 Bedienungsanleitung

6.3 Control elements/operation

6.3.1 Control elements

Function 1
1 Digital Operational state
Display display
2 Power On / off button
starts the de-
humidification
process
3 Timer For programming
the desired start /
stop time
4 Arrow Setting the desired
key relative humidity
(increasing)
5 Arrow Setting the desired
key relative humidity
(lowering)
Operation indicator 1
6 Room tmp
7 Dehumidification active
8 PRES > Room temperature too high
9 SET > Shown when desired humidity level is selected
10 CURRENT > Shows the current humidity level
11 Current or desired humidity level during setting
12 FULL > Condensate container full
13 Ventilator active / power level (automatic control)
14 FROST > De-icing the condenser
15 Hour countdown until switch on/off time
16 T OFF > Shows active switch-off timer
17 T ON > Shows active switch-on timer
Function 2
Disabling Timer
On and Timer Off
Adaptation of the
value for humidity
Setting the desired
duration in hours
Fig. 5
for auto start /
stop (increasing)
Setting the desired
duration in hours
for auto start /
stop (lowering)
6
17
16
15
14
Fig. 6
81
1
7 8
13
Operation indicator 2
Error code
Error code
Condensate container not fitted correctly
Hour display while setting switch on/off time
Translation of the original instruction
2 3
4 5
9
10
11
12