General Specifications; Scope Of Delivery; Technical Description; Connection Sockets - Eisemann BSKA 9,5 EV SS curve Betriebsanleitung

4.5.

General specifications

The power generator BSKA 9,5/14 SS curve consists of the following components:
• Petrol engine
• Three-phase synchronous generator
• Base frame
• Control box
• Acoustic enclosure
4.6.

Scope of delivery

The power generator is supplied with operating manuals for the power generator and drive engine. It
is also supplied with a tool kit containing the following items:
2x spare spark plugs, 1x spark plug wrench, 1x screwdriver, 1x wire brush, 1x test lead for the protecti-
ve earth test system and 2 open-jaw spanners for 10, 11 and 13 across flats.
Other accessories are not included as standard.
4.7.

Technical description

4.7.1. General specifications
The petrol-engine three-phase power generator is installed on a base frame. The engine hood can
be swung up for maintenance access. Operation of the power generator is performed via an digital
controlling.
4.7.2.

Connection sockets

Voltages of 400 V / 50 Hz are available via the CEE 400 V socket (item 16-6). Voltages of 230V / 50 Hz
up to the power limit are available via the CEE 230 V socket (item 16-4). Voltages of 230V / 50 Hz
up to max. 16 A are available via the shuttered socket (item 16-12).
If extension cables or mobile distribution networks are used, the following rules apply:
Overall length of the conductor extension network:
• max. 60 m at 1.5 mm
• max.100 m at 2.5 mm
The loop impedance, i.e. the sum of all connected cables as defined by ISO 8528-8, must be
no greater than 1.5 Ω. Recommendation: Use only tested extension cables.
Page 22
NOTE