1.2.2.
Gas, dust, steam, smoke
Welding, burning, and grinding on the power generator is only permitted when this work is
I
expressly approved by EISEMANN. There is a risk of fire and explosion!
I
Before starting any welding, burning, and grinding, clear off any dust and combustible materi-
als from the power generator and its surroundings! Ensure adequate ventilation (risk of explo-
sion)!
Comply with any existing local rules when working in tight spaces!
I
Use the specified personal protective equipment!
I
1.2.3.
Noise
The noise control equipment on the power generator must be in its protective position during
I
operation!
Use the specified personal protective equipment!
I
1.2.4.
Oils, greases and other chemical substances
I
When handling oils, grease, and other chemical substances follow the safety regulations for
each product!
Be careful when handling hot operating equipment and auxiliary materials. There is a risk of
I
getting burned or scalded!
I
Use the specified personal protective equipment!
1.2.5.
Hot parts
Never touch any hot parts, such as the exhaust system, engine parts or the like. Danger of
I
burns!
Use the specified personal protective equipment!
I
Page 7