A
T
B
J
UNCTION BETWEEN TAP AND WATER INLET HOSE
C
W
4. Take off the hose and immerse it in warm water (approx. 50 °C); s. fig. below.
5. Pour warm water (2 - 3 litres / approx. 50 °C) into the drum and wait approx. 10
minutes; s. fig. below.
6. Reconnect the water inlet hose to the tap and check, that the water inlet and the
water drain works properly.
7. When you operate the appliance again, the ambient temperature must be higher
than 0 °C.
AP
ATER INLET HOSE
~
~
123