Installing The Flue Screen - hanseatic SY-103E6-E14-C29-L12-900 Gebrauchsanleitung

(4)
1. Insert the end of the exhaust hose (4) with
the larger diameter (153 mm) into the con-
nection with the check valve.
2. Secure the lower end of the exhaust hose
with the cable tie (9).

Installing the flue screen

(6)
1. Screw the wall mount for the upper flue
screen (6) into the prepared dowels using
2 round-head screws (10).
2. Push the upper part (2) of the flue screen
halfway into the lower part (3) of the flue
screen.
(9)
3. Place the retaining plate (7) onto the lower
flue screen (3) so that it lines up with the
chamfers on the inside. (Screws and elon-
gated holes should point upwards).
4. Turn two plate screws (8) from the outside
through the retaining plate (7) and the
lower flue screen (3). Tighten the screws
somewhat, but only loosely.
(2)
(3)
5. Place the upper (2) and lower (3) parts of
the flue screen onto the exhaust hood (1)
with the closed side of the flue screen fac-
ing upwards.
Page EN-15
Assembly
(7)
2x
(8)
(3)