Märklin Central Station Bedienungsanleitung Seite 21

Locomotives in the database can be sorted with two different criteria.
Either by the Märklin item number (touch button 2) or by the name
suggested by Märklin (touch button 3). Tip: The factory often assigns
names from the class number or from a well known nickname for the
prototype.
If you press the first letter or number on the keypad depicted in the
lower part of the screen, the display for the data line that begins with
this letter or number will appear.
Example: The list is sorted by names. If you press on the key for "8",
the class 80 will appear from the different data lines, since it is the
first data line that begins with the number "8".
After the data line has been selected, it is taken directly into the
locomotive controller part of the Central Station. If you want to edit
locomotive data such as the name, function button assignment, or
the address, etc., please read the notes in section 3.3.4.
Enter new loco Expanded
Decoder
Märklin Motorola 14
Adress
12
(Motorola)
Name
New_
Add locomotive to favorites list
Note: In contrast to the Mobile Station the Central Station will accept
several entries in the locomotive list with the same address! No
locomotives with the same identical address can be controlled si-
multaneously. A message to this effect will be shown
on the locomotive controller part of the screen. This
also holds true for locomotives with a consecutive
address (model with two addresses).
Variation 2: Entering manually
After you have selected this menu, an entry field will appear in which
you can give different types of locomotive data. A keyboard is loca-
ted under the entry field to facilitate the entry of texts. The following
settings can be made:
Decoder
Setting the type of decoder. Standard practice is that "Märklin Moto-
rola 14" or "Function Decoder" are the only variations that can cur-
rently be set. "Function Decoder" includes the function decoders that
can be controlled with the first central unit, the 6020 Central Unit.
Examples of these are the 4998, 4999, or 49960 working cars, the
7651 rotary crane, or the 58115 1 Gauge car. The function decoders
(examples: 60960 or 60961) or working models based on the same
technology, models that can only be controlled with the 6021 Control
Unit 6021, must be set up on the Central Station with "Märklin Moto-
rola 14" as a type.
Address
The address can be set between 1 and 80 for locomotives.
Ways to set addresses:
1. Touch the "Address" field. Then change the value of the address
by turning the control knob.
2. Change the value of the address with the "-" and "+" fields to the
left and right of the address display.
3. Touch the "Address" field. Delete the value with the "<-" button
(upper right on the keyboard) and enter the new address between
1 and 80 with the numbers on the keyboard. The addresses 1
through 9 are entered as single digits. If you try to enter addresses
above 80 or below 1, you will get an error message.
Name
By touching the "Name" field on the screen you can then enter a
designation for the locomotive in the entry field next to the "Name"
field by using the keyboard. This designation will then always appear
on the part of the screen for the locomotive controller, when you
call up the locomotive. The name can consist of a maximum of 16
characters.
Note: If you don't make an entry in this field, the preset designation
"New" will appear as the name. The Central Station does not check
whether the name has already been taken.
Locomotive Symbol
You can use this selection field to select an appropriate symbol for a
new locomotive you are setting up in the Central Station. To do this,
touch the locomotive symbol depicted or the arrow positioned to
the right of it you're your finger. A larger selection field will appear in
which you can select a suitable element by again either touching the
desired element, by turning the control knob and then pressing on it
or by touching the check mark field to the right under the selection
field or by scrolling up and down in the column on the right.
Note: An incorrect symbol has no effect on locomotive operations.
Adding a Locomotive to Your Favorites List
A locomotive you run frequently can be found more easily in an
Loco symbol
extensive motive power list by integrating the locomotive into a favo-
rites list. This entry in the favorites list can be used as a sort criterion,
when you call the locomotive up later. There is a selection field in
front of the text "Add locomotive to favorites list". The assignment
of a locomotive to the favorites list is indicated by touching this
selection field. A check mark by the locomotive indicates that this
locomotive is in the favorites list.
The data line with the settings you have just made is accepted by
touching the confirmation area with the check mark below and to the
right in the selection window. By touching the end field with the "x",
you leave this submenu without accepting the locomotive data. The
same holds true, when the locomotive controller area of the screen in
1 - 80
the upper left corner is touched.
Expanded
Still another entry field is located behind the "enter new locomotive"
entry field. This new field is designated on the upper edge with "Ex-
panded". Touching this "Expanded" field brings the entry field to the
front and the "enter new locomotive" field is put in the background.
Up to 6 additional fields for setting values can be called up in this
"Expanded" submenu. Whether these fields are used depends on the
type of decoder used in the locomotive.
1 = Analog Settings
In this instance the following parameters can be set for certain
decoders:
Analog mode activated: determining whether the locomotive can be
operated with analog controls.
Starting voltage: determining the voltage level in the first speed level.
Maximum speed: determining the maximum speed at the maximum
running voltage
21
The symbol can be changed later at any time.
Enter new loco Expanded
� Sound settings
AC
Volume
�
�
M
AUX
�
�
�
Central Station 60212