Cocraft LXC series Bedienungsanleitung Seite 6

i) Do not use damaged accessories. Inspect the accessory and make sure there are
no splits or cracks in the grinding wheels; cracks or wear and tear on the backing
plates, or loose or torn bristles on the steel brush wheels.
If you drop your power tool or accessory, check for damage. If the accessory
is damaged, use a new/undamaged accessory. After inspecting the tool and
attaching an accessory, keep yourself and others outside of the power tool's
danger zone and let it run at full speed for one minute. Damaged accessories will
normally break during this test period.
j) Wear personal protective equipment. Depending on how you use the machine;
use a visor/face protection or safety glasses. If necessary use a mask,
ear protection, gloves, and apron/work clothing to protect you from small shards
of metal or splinters from the work object. The eye protection you use must be
able to protect against flying debris produced in different working positions.
The breathing protection should be able to filter any particles produced by
the work. Prolonged exposure to high levels of noise can result in hearing damage.
k) Keep bystanders at a safe distance from the work area. Everyone who visits
the place of work must wear personal protective equipment. Debris from
the workpiece or from a damaged accessory can fly off and injury people outside
of the immediate work area.
l) Position the mains lead well away from the rotating accessory. If you lose control,
the lead can be sliced through or become entangled and pull your hand or arm
into the rotating accessory.
m) Never put the power tool down before the accessory has completely stopped
rotating. The rotating accessory can become stuck in the material resulting in
loss of control.
n) Do not run the power tool when you are carrying it. Unintentional contact with
the rotating accessory can cause clothing to become caught and pull the tool
towards your body.
o) Regularly clean the motor's ventilation ports. The motor's fan pulls in dust, which
gets inside the outer casing and a build up of this collected metal dust can lead
to electrical dangers.
p) Do not use the power tool near flammable materials. Sparks can easily ignite
flammable material.
q) Do not use accessories which require liquid coolants. The use of water or other
liquid coolants can result in electric shock or electrocution.
6