Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
ASSEMBLY INSTRUCTION
a)
Pull out one lock pin (55) from the main frame (1). Insert the slide rail (26) onto the U type con
nect tube (58). Secure using six allen bolts (24) and six flat washers (25).
b)
Attach two cushion rubbers (22) to the front of the slide rail (26) and secure with two allen bolts
(23).
c)
Slide the seat (11) onto the slide rail (26).
d)
Then Attach another two cushion rubbers (22) to the rear of the slide rail (26) and
secure with two allen bolts (23).
e)
Attach the end caps (5L & 5R) onto the back of the slide rail (26).
Step 2
35
Werbung
Inhaltsverzeichnis
