No Spent Mandrel Discharge; Led Lights Flashing; Warranty - Gesipa PowerBird Pro Betriebsanleitung Mit Ersatzteilliste

GB
4.2

No spent mandrel discharge

Cause
Nosepiece too small
Dirt inside head
Spent mandrel container full
Mandrel tube blocked
4.3

LED lights flashing

Cause
No battery
Blind riveting tool overloaded
(LED flashes slowly – 1 Hz)
Blind riveting tool blocked on return (LED
flashes fast – 2 Hz)
5.

Warranty

The applicable terms and conditions of guarantee shall apply and can be viewed under follow-
ing link: www.gesipa.com/agb
22
Remedy
Exchange according to table (see 2.4)
Clean (see 2.7)
Take off and empty
Remove blocked mandrel and check for free
ejection (see 2.6.2)
Remedy
Change battery (see 2.6.2)
Select rivet dimensions according to work
capacity (see 2.1; 2.6.2)
Unscrew steel head sleeve and remove
blockage (see 2.7)