Embedded Number; Storing Numbers From Messages; Calling Numbers In Messages - Motorola MTP850 S Ausführliche Bedienungsanleitung

66 | Main Menu
4 Select one of the following:
• Store — Saves a message as a template. Change the default template name and press Ok.
• Delete — Deletes the selected message. Press Yes to confirm.
• Delete All — Deletes all the messages in the Inbox/Outbox. Press Yes to confirm.
• Reply (only for Inbox) — Invokes the edit screen with the old message as default text and the message
originator as a recipient. After editing, press Send, the PTT button, or the S
• Resend (only for Outbox) — Invokes the edit screen with previously entered text with the same recipient.
After editing, press Send, the PTT button, or the S
• Forward — Invokes the edit screen with the old message to send it to a different participant. After editing,
press Send, the PTT button, or S
• Refresh — Re-orders the message list and displays the new messages.
• Delivery Status (only for Outbox) — Shows the date and time of the message when it sent, delivered, read,
and expired was not delivered, expired was not read, failed unknown.

Embedded Number

This feature allows you to call a number from a message or to start a group call with the message sender talkgroup.

Storing Numbers from Messages

Prerequisites: Embedded Number feature is enabled by your service provider.
When and where to use: You can save the sender's or embedded number from the message to a new or existing
contact.
Procedure:
1 From the home screen, press the
2 Select Messages → Inbox.
3 Highlight the required message and select Read.
4 Press the PTT button.
5 Radio displays a list of the numbers (including the senders number).
6 Highlight the required number and press Store.
7 Highlight required contact and press View.
Note: To store a number for a new contact, select [New Contact] and fill out the required fields. Press
Done to save it..
8 Select Edit.
9 Choose the Type of the new number and press Done.

Calling Numbers in Messages

Prerequisites: Embedded Number feature is enabled by your service provider.
When and where to use: You can return a voice call to the sender of a message or to any number that is embedded in
the message text.
Procedure:
1 From the home screen, press the
2 Select Messages → Inbox.
3 Highlight the required message and select Read.
4 Press the PTT button.
5 Radio displays a list of the numbers (including the senders number).
6 To call, highlight to the required number and press the PTT button or the S
Send Feedback | |
key to send.
END
key to send.
END
key.
MENU
key.
MENU
key to send.
END
key.
END