Talkgroup Icon Selection; Using Timed Talkgroup Change; Activating Talkgroup Scanning - Motorola MTP850 S Ausführliche Bedienungsanleitung

32 | Getting Started
• Press R K
OTARY NOB
Note: If the R
mode.
Note: Your radio can have an access up to three levels of the folder structure.

Talkgroup Icon Selection

Table 8: Talkgroup Icon
Icon

Using Timed Talkgroup Change

This feature allows you to switch a selected talkgroup between the currently selected talkgroup and a predefined
talkgroup (TMO or DMO), making the predefined talkgroup the selected talk group for a predefined time by using a
One-Touch button. After the timer expires, your radio returns to the previously selected talkgroup.
Prerequisites: Timed Talkgroup Change is assigned to a One-Touch button.
Procedure:
1 Press and hold and hold the One-Touch button.
2 Your radio switches the selected talkgroup to the predefined talkgroup for a predefined amount of time.
During the predefined time the radio initiates or joins group communication (SDS, status SDS, or call) on the
predefined talkgroup as the selected talkgroup.
Your service provider can assign a function to the second press of the One-Touch button to:
• Return to previously selected talkgroup
• Restart the predefined time
• No action
3 When the timer expires (potentially after being restarted a number of times) the radio switches to the previously
selected talkgroup.

Activating Talkgroup Scanning

When and where to use: If you want to monitor any TMO Group Call in the defined talkgroup list.
Procedure:
1 From the home screen, press the
2 Select More . . . → Group Setup → Scan → Scanning.
3 Select Select List and then a list name.
Your radio displays list name Selected.
Send Feedback | |
and rotate it until the required talkgroup name is displayed. Press Select to confirm.
K mode is set to Scroll, then you do not need to press it to enter the scrolling
OTARY NOB
Description
Displayed when the talkgroup is from a different network than the one currently selected.
key.
MENU