Mounting The Magnetic Strip - Siko LE200 Originalmontageanleitung

LE200
Installation

4.2 Mounting the magnetic strip

External magnetic fields
CAUTION
Magnetic tape's magnetization gets lost. Any direct contact of the mag-
netic strip with magnetic fields (e. g. adhesive magnets or other perma-
nent magnets) is to be avoided. Sensor movements during power loss are
not captured by the follower electronics.
` Protect the magnetic strip from impact by external magnets.
Solving bonding of the magnetic tape
NOTICE
` Remove foreign anti-adhesive substances including oil, grease or dust
` For optimum bonding, the surfaces to be bonded must be dry and
` Observe a bonding temperature between 20 °C and 30 °C in dry rooms.
Deterioration of measuring accuracy
NOTICE
` Mount the magnetic tape level with the mounting surface or distance
Length of the magnetic tape
NOTICE
` For technical reasons, the magnetic tape must be ≥55 mm longer than
When applying long pieces of magnetic tape do not immediately remove
the complete protective film, but rather peel back a short part from the
end sufficient to fix the tape. Now align the tape. Now you can pull out lat-
erally the remaining length of the protective film, simultaneously pressing
the tape firmly onto the mounting surface. A wallpaper seam roller could
be used to assist in applying pressure onto the magnetic tape when fixing
it in position.
Mounting
1. Clean mounting surface
2. Remove protective film
3. Stick down the magnetic tape
4. Clean surface of magnetic tape carefully.
5. Remove protective film
6. Fix cover tape (both ends should slightly overlap).
7. Also fix cover tape's ends to avoid unintentional peeling.
LE200 · Date 15.01.2020 · Art. No. 84882 · Mod. status 7/20
by means of detergents that are preferably evaporating residue-free.
Suitable detergents include ketones (acetone) or alcohol offered for
instance as fast cleaning agents by the Loctite or 3M companies.
bonding shall be carried out with maximum contact pressure.
to be measured. Unevenness deteriorates the measuring accuracy.
the distance to be measured.
(Fig. 1):
carefully.
1
of the adhesive tape
2
.
4
of the cover tape
6 5
English
.
3
.
19