Assembly And Installation - ECOLAB EcoPlus PDRX Kurz- Betriebsanleitung

5

Assembly and installation

Personnel:
Protective equipment:
CAUTION!
– Assembly must always be carried out by authorized personnel and in
compliance with this User Manual.
– Wear appropriate protective clothing during the assembly and handling
of this system. All valid safety regulations on handling chemicals must
be observed.
– Electrical work may only be carried out by qualified electricians!
When opening covers or removing parts, other parts carrying an
electrical current can be exposed. Connecting parts can also be live.
– Always use approved installation parts and accessories;
refer to accessories and installation list.
– Make absolutely sure that all line connections are firmly mounted and
leakproof.
– Improper assembly may lead to injury due to chemical leaks.
– Legal regulations and the applicable product data sheets must be taken
into account for all chemicals.
– Use personal protective equipment.
5.1 Assembly and installation
NOTICE!
The assembly and installation descriptions that follow are the
recommended methods for installation. In practice, however, the actual
assembly and installation processes are determined by various conditions
and physical situations.
Units must be installed in line with current regulations.
n The EcoPlus PDRX is intended for wall mounting!
n The unit must be arranged so that all display messages are clearly visible.
n The appliance must be fixed in such a way that the cleaning solution can enter the
tank of the dishwasher unhindered.
n Leave a sufficiently large space above the unit to enable product blocks to be loaded
or exchanged without obstruction.
n Service personnel
n Mechanic
n Qualified electrician
n Specialist
n Protective eyewear
n Chemical-resistant protective gloves
n Safety shoes
13
Assembly and installation
417102610 Rev. 01-12.2020