B. Braun Aesculap CMOS PV470 Gebrauchsanweisung/Technische Beschreibung Seite 7

Connections on the rear panel of the camera control unit
Connector
RS232 connector 15
USB connector for service pur-
poses 14
Remote connection 13
S-Video output 12
Communication interface 11
Equipotentialization connector 10 Connector for equipotentialization
HD-SDI outputs 9
DVI outputs 8
Fuse holder 7
Mains connector 6
Description
For future applications
Is only used by the manufacturer
for service purposes
Connection for remote operation
of peripheral devices (e.g. video
printers) via cables with a 3.5 mm
mono-plug
S-Video signal output
Connector to connect further
communication interface devices
cables acc. to DIN 42801
HD SDI video signal output
(2 connectors)
DVI video signal output (2 connec-
tors)
For standard fuse 0.63 A (T)
Connection for power cord
IEC 320, see accessories / spare
parts
Control element on the camera head with endocoupler
Connector
Safety lock 16
Locking mechanism 17
Focusing ring 18
Zoom ring 19
Button A (up) 20
Button B (right) 21
Button D (left) 22
Button C (down) 23
Cap 24
Connector plug 25
Camera cable 26
Endocoupler lens
Description
Prevents inadvertent opening of
endocoupler
Spring-loaded locking for the
endoscope ocular
Turnable focusing ring
Turnable zoom ring (only PV472)
Function key
Function key
Function key
Function key
Cap to prevent moisture from
entering the plug
Connector plug to the camera
control unit
Connection cable between the
camera head and camera control
unit
Coupler for endoscope ocular
5