How To Assemble - Lionelo Levi One Bedienungsanleitung

C.
How to fasten and undo belts
Before you fasten the child safety seat belts, make sure the belts are at the proper
height (see above: Height of the child safety seat belts).
1.
Place the child in the child safety seat.
2.
Pull child's arms through shoulder belts.
3.
Connect shoulder belts and insert their tips in the buckle (G). If you can hear
a "click", it means the belts have been fastened properly (fig. 9).
To undo the belts, press the red button on the buckle (G).
D.
How to disassemble belts
The child safety seat belts must be disassembled if children from group II and
III are the users.
1.
Loosen the child safety seat belts.
2.
Remove the belts from the connector (fig. 12).
3.
Put the child safety seat down. Pull three metal belt fasteners through holes
in the body (fig. 13b).
4.
Pull the belts up to detach them (fig. 13c).
To assemble the belts, repeat the procedures in a reversed order.
Hide the child safety seat belts in a safe place.
Headrest
The height of the headrest must be adapted to the child's height (see: fig. 11).
A – Too high
To change the height of the headrest, grab the adjustment lever (M) and then
set the desired height. After you have finished, make sure the headrest has been
secured in place properly, try to move it up and down.
Seat liner
If the child needs more space in the child safety seat, remove the seat liner.

How to assemble

Group I
The child secured with
child safety seat belts
EN
B – Too low
Group II
Child secured with car
safety belts
‑ 10 ‑
C – OK
Group III
Child secured with car
safety belts