Herunterladen Inhalt Inhalt Diese Seite drucken

Service; Original Accessories/Auxiliary Equipment; Appliance-Specific Safety Instructions; Before First Use - Parkside PLLL 16 A1 Bedienungsanleitung

Löt-arbeitsstation
Vorschau ausblenden Andere Handbücher für PLLL 16 A1:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

c) Use the power tool, accessories and tool bits
etc. in accordance with these instructions, tak-
ing into account the working conditions and
the work to be performed. Use of the power
tool for operations other from those intended
could result in a hazardous situation.

5. Service

Have the power tool repaired by the Service
centre or a qualified electrician and only using
genuine replacement parts. This will ensure
that the safety of the appliance is maintained.
Always ensure that the power plug or the
power cable is replaced only by the manu-
facturer of the appliance or by an approved
customer service provider. This will ensure that
the safety of the appliance is maintained.
Original accessories/auxiliary
equipment
Use only the additional equipment and acces-
sories specified in the operating instructions.
Using attachments or accessory tools other than
those recommended in the operating instructions
can lead to a risk of injury.
Appliance-specific safety instructions
This product is not a toy and does not belong in
the hands of children.
Never look directly into the light source while it
is in operation.
Do not use the magnifying glass on the lamp
head to look at light sources such as LED lamps
or laser beams. The optical magnification can
cause damage to your eyes.
When not in use, cover the magnifying glass in
the lamp head with the cover, otherwise there is
a fire risk from concentrated sunlight.
Do not operate the light unsupervised.
Check the light from time to time for damage.
If the lamp or the mains adapter is damaged,
do not touch the appliance. First, disconnect
the related power socket (e.g. with the relevant
circuit breaker) and then pull the mains adapter
carefully from the socket. Do not operate the
appliance again; have it repaired in a specialist
workshop.
PLLL 16 A1
Avoid any heavy mechanical stresses on the
lamp. Do not expose the appliance to high
temperatures, extreme vibrations, high humidity,
dripping or splashing water.
Never pour liquids over the lamp. There is a
severe risk of fire or fatal electrical shock. If,
however, liquids do get inside the appliance,
pull the plug out of the socket immediately and
contact a professional.
Never leave the packaging material unattended.
It might become a dangerous toy for children.
Handle the appliance with great care. It can
be damaged by bumps, impacts or a fall, even
from a low height.
Use only the mains adapter supplied with this
appliance.
Never touch the mains adapter with wet or
moist hands. There is a risk of life-threatening
electric shock!
Do not pull on the cable to remove the plug
from the socket. Touch the mains adapter
always only on the housing.
Consult a professional if you are in any doubt
about the operation or the safety of this product.
Before first use

Setting up the appliance

NOTICE!
Do not set up the appliance near easily flam-
mable materials (e.g. curtains, drapes, furnish-
ing fabrics, etc.). When using the magnifier
lamp
in combination with soldering work,
there is a risk of fire. Keep the entire appliance
out of the reach of children. Children might
knock down the appliance and be injured.
Never cover the magnifier lamp
in operation.
Never set up the appliance on an unstable sur-
face. If the appliance falls, it could cause an injury.
Remove the product from its packaging and
place it on a flat and level surface.
Align the magnifier lamp
neck
as required.
GB
while it is
using the goose-
5
IE

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Ian 111527

Inhaltsverzeichnis