Diffusers - Cameo H1 FC Bedienungsanleitung

DIFFUSERS

The spotlight is supplied with 3 diffusers (1x pre-assembled), which have different dispersion
characteristics: 30° (narrow), 42° (middle), and 54° (wide). The beam angle of the spotlight can
thus be individually set at 30°, 42° or 54°. Loosen the four screws (A) on the retaining ring on the
front of the spotlight with a suitable tool and remove the retaining ring from the spotlight. Use a
small flat-bladed screwdriver to remove the diffuser from the retaining ring. Insert the required
diffuser in the retaining ring and then secure the ring to the spotlight with the previously loosened
screws.
A
A
A
A
Similar to image
24