FL (Flash/Stroboscope)
Pressing the button for setting the strobe immediately activates the Static operating mode. The strobe effect can now be set using the +
and - buttons. The values for the stroboscope effect correspond to the values in channel 2 of the DMX table 4CH and channel 3 of the tables
13CH1 and 20CH (the set value is shown in the display).
R, G, B, W, A and UV (CW and WW without function)
Individual color mixtures can be created with the 6 buttons R, G, B, W, A and UV (static mode – static). Press the button for the desired LED
color and use the + and - buttons to set the brightness from 000 to 255 (the value is shown in the display).
Example: Set red and blue at maximum brightness, and green, white, amber and UV at minimum (i.e. off) to achieve a bright magenta
color blend.
PG (color change programme)
Select the desired color change programme 1–6 by repeatedly pressing PG and then set the brightness using the + and - buttons. Press the
SP (Speed) button and then use the + and - buttons to set the programme speed (the programme, brightness and running speed are shown
in the display).
CM (color presets)
Select the desired color preset by repeatedly pressing the CM button and then set the brightness using the + and - buttons (the color preset
and brightness are shown in the display).
SC (no function)
AU (no function)
DIFFUSERS
Two diffusers are supplied with the spotlight, each with a different beam angle (32°, 45°). The beam angle of the spotlight can be set at
22° (without diffuser), 32°, or 45°. Place the desired diffuser in front of the light-emitting lenses and turn it anticlockwise according to the
principle of a bayonet connection until the four outer lugs on the edge of the diffuser engage in their holders in the anti-glare ring. The four
magnets in the diffuser and the four opposing magnets set into the lens hood are now directly over each other and the diffuser is securely
held in place. Ensure that the side of the diffuser with the magnets set into it is facing the spotlight and that the recess in the edge of the
diffuser is in the flat area of the lens hood.
15