Diffusers - Cameo CLQS40CW Bedienungsanleitung

/BRIGHTNESS
12 brightness settings. Press the button and then select the desired brightness using the + and - buttons (level 1 = Blackout).
FL/FLASH (Strobe)
Activate the strobe effect and set one of its 14 speeds. Press the FL button, then use the + and - buttons to select the flash frequency (level
1 = strobe disabled, level 2 = slowest flash frequency, level 14 = fastest flash frequency).
R/G/B/W/A/U (W = white/ R, G, B, A and U no function)
To set one of the 12 brightness levels, press the W button then use the + and - buttons to select the level, whereby level 1 switches the
LEDs off.
PG
No function.
CM
No function.
SC (sound-controlled strobe)
To activate the sound control mode, press SC and set the microphone sensitivity using the + and - buttons as required (11 levels).
AU
No function.

DIFFUSERS

Two diffusers are supplied with the lamp, each with a different beam angle (1 x 10° and 1 x 25°). The beam angle of the lamp can be set at
4.5° (without diffuser), 10°, or 25°. Insert the desired diffuser in front of the light-emitting lens and secure it with the supplied securing ring.
10