Cameo H1 FC Bedienungsanleitung Seite 19

DEVICE MENU (Fixture Menu):
Select the desired menu item with  or , or by turning the encoder, confirm with  or by
pressing the encoder. Back with  or BACK.
Set the value or status with  or , or by turning the encoder, confirm with  or by pressing
the encoder. Back with  or BACK.
CONFIGURE DMX START ADDRESS
Select DMX Address, confirm the selection, set the desired DMX address and confirm the input.
SELECT DMX MODE
Select DMX Mode, confirm the selection, then select the desired DMX mode and confirm the
selection.
AUTO STANDALONE MODE
The 6 available auto-programs each comprise non-editable colour-change sequences. Brightness
(Dimmer) and running speed (Speed) are separately adjustable in each programme.
Select Stand Alone, confirm the selection, then select Auto and confirm again. Now select the
desired program (Program 1 - Program 6) and confirm again. Now select Dimmer or Speed,
confirm and set the brightness or speed value from 001 to 100 as desired. Confirm all entries.
19